Mitsubishi Electric MR-J2-03B5, Инструкция по эксплуатации

Страница: 8 / 113

A - 7
COMPLIANCE WITH EC DIRECTIVES
1. WHAT ARE EC DIRECTIVES?
The EC directives were issued to standardize the regulations of the EU countries and ensure smooth
distribution of safety-guaranteed products. In the EU countries, the machinery directive (effective in
January, 1995), EMC directive (effective in January, 1996) and low voltage directive (effective in January,
1997) of the EC directives require that products to be sold should meet their fundamental safety
requirements and carry the CE marks (CE marking). CE marking applies to machines and equipment
into which servo amplifiers have been installed.
(1) EMC directive
The EMC directive applies not to the servo units alone but to servo-incorporated machines and
equipment. For specific EMC directive conforming methods, refer to the EMC Installation Guidelines
(IB(NA)67310).
This servo has been confirmed to be compliant with the EMC Directives in the compliance method
given in the EMC Installation Guidelines.
(2) Low voltage directive
The low voltage directive applies also to servo units alone. Hence, they are designed to comply with
the low voltage directive.
This servo is certified by TUV, third-party assessment organization, to comply with the low voltage
directive.
(3) Machine directive
Not being machines, the servo amplifiers need not comply with this directive.
2. PRECAUTIONS FOR COMPLIANCE
The standard models of the servo amplifier and servo motor comply with the EN standard.
In addition to the precautions for compliance with the EN standard provided in this manual, strictly
follow the items given below. Where there is no specific explanation of EN standard compliance, the
specifications are the same as those of the standard models.
(1) Configuration
24VDC
power
supply
Circuit
protector
Reinforced
insulation type
Servo
amplifier
Servo
motor
SM
Control box
(2) Environment
Operate the servo amplifier at or above the contamination level 2 set forth in IEC664. For this
purpose, install the servo amplifier in a control box which is protected against water, oil, carbon, dust,
dirt, etc. (IP54).