OPERATING PROCEDURE
PHOTOS
53
Photo 21
Photo 22
Fan grille
(Fan grille consists of the following: motor
dampers (for ice making compartment/refrig-
erator compartment, versa compartment/veg-
etable compartment), refrigerator fan motor,
fan, thermal fuse, and 3 thermistors).
Photo 20
Tank holder
Pipe
Catches
(Automatic
Ice maker
assembly)
Cover (IM)
Automatic
Ice maker
assembly
Catches
(7) Remove catches (3 places) in order to detach the cover. (See
photo 20)
(8) Remove pressing catches (2 places) upward, and pull auto-
matic ice maker assembly to the right side. (See photo 20)
(9) Remove rivet (1 rivet) to remove the cover from the fan
grille. (See photo 21)
(10) To remove the fan grille, remove the screws (4 screws) on
the right, left, bottom, the lower catches (3 places), and the
connectors (4 connectors) in the connector area (See photo
21) on the upper left. (See photo 22)
After removing the fan grille, attach the lead wire on the side
of the refrigerator with a tape to protect it from getting wet with
evaporator condensation.
Fan grille consists of the following: motor dampers (for ice-
making compartment/ refrigerator compartment, versa com-
partment/vegetable compartment), refrigerator fan motor, fan,
thermal fuse, and 3 thermistors. (See photo 22)
Fan grille
Catches
Rivet
Cover (upper)
Screws
Fan grille
Screws
Connector area
Cover (IM)
Automatic ice maker assembly
Cover (upper)
Fan grille
Note