OPERATING PROCEDURE
PHOTOS
48
DISASSEMBLY INSTRUCTIONS
7
Plug out before work!!
Check the automatic ice-maker pressing ice making stop switch.
When assembling & disassembling parts seven kinds of screws and rivets are used. Do not mistake to use them.
MR-E55R-C
MR-E60R-C
Rivet
4 12
Stainless steel
4 12 (Black)
With metal washer
4 16 (White)
With plastic washer
Specified screw
Rivet
Photo 1
Photo 2
Photo 3
1. Parts inside the refrigerator compartment: AUTO-
shelf
(1) Remove two-way flexishelf from the refrigerator compartment.
Move the lever to the right, and slide the AUTO-shelf to the
uppermost position. (See photo 1)
Push the catches (4 places) inward, and remove the AUTO-
shelf from the metal stoppers. Lift up and remove the AUTO-
shelf toward you. (See photo 2)
Remove the metal stoppers in front, back, left, and right sides
of the unit.
First, install the metal stoppers to the unit. Then, place the
AUTO-shelf on top, and push the AUTO-shelf downward until it
clicks into place (4 places). Refer to photos 3, 4 for the direc-
tion of the metal stopper installation.
Metal stopper
Photo 4
AUTO-shelf
Metal
stopper
Levers
AUTO-shelf
Ceiling of slide chilled
compartment
Two-way
flexshelf
Catch
Metal
stopper
Catches
Catches
Catches
Catches
AUTO-shelf
Caution on assembly