20
a) Compartment serial number
Serial number of the selected compartment for set temperature adjustment is displayed on the part that are usually used
for room display.
Each serial number is assigned to each compartment that will be used in set temperature adjustment mode besides damper
operation mode and thermistor temperature check mode.
The sum of the corresponding values of the lighting indicators is the compartment serial number.
Room display
Corresponding
values
8
4
2
1
Serial number
Assigned compartment
Set temperature adjustment mode
1
Refrigerator compartment
2
Slide chilled compartment
3
Ice making compartment
4
Versa compartment
5
Vegetable compartment
6
Freezer compartment
7
Defrosting
8
Ice tray
9
Outdoor air
10
Deodorization
11
Thermopile
/ : SW operation is effective/ineffective
b) Set temperature adjustment level
Adjusting the set temperature
(1) Select the compartment with
button.
(2) Each press of the button makes a “beep” sound and changes the compartment to adjust the set temperature.
Each compartment will be displayed using the serial numbers (1: Refrigerator compartment~ 6: Freezer
compartment) in numeric order repeatedly.
Refrigerator compartment slide chilled compartment ice making compartment versa compartment
vegetable compartment freezer compartment
Set temperature adjustment operation of slide chilled compartment is possible; however, it is ineffective because slide chilled
compartment thermistor is not installed.
(3) Select the adjustment level of set temperature with
.
Each press of the button makes a “beep” sound and changes the adjustment level of set temperature.
There are 5 adjustment levels of set temperature ( 2 & 0), and the selected level is displayed.
The
indicator that lights up represents minus (
−
).
Adjustment level Temperature adjustment display
Change of the set
temperature
+2
About +2 ºC
+1
About +1 ºC
±0
No change
−
1
About
−
1 ºC
−
2
About
−
2 ºC
The changed adjustment levels are stored on the control board. If the control board is replaced, the updated information will be lost.
Release
With the ice making compartment’s door opened, press
and
simultaneously for 3 seconds until a “beep”
sound is heard. The screen returns to the normal temperature display.
The function is automatically released in one hour.
Although unplugging and plugging the power code can release this function, it is recommended to follow the procedure
above for protection of the compressor.
