Mitsubishi Electric MELFA RH-FRH-D, Описание установки

Страница: 21 / 166

Introduction Environmental conditions for operation
FR series 1 - 5
1.3 Environmental conditions for operation
Because the environmental conditions have a significant effect on the operational life of the equip-
ment, you should not install the robot system in the following conditions:
●
Power supply
Do not use when
– the power supply is below 180 V AC or above 253 V AC,
– transient power failures last more than 20 ms,
– the mains supply is unable to provide an output of at least 0.5 kVA (RV-2FR/RH-3FRH), 1.0 kVA
(RH-3FRHR/RV-4FR/RH-6FRH), 1.5 kVA (RH-12FRH/20FRH), 2.0 kVA (RH-1FRHR/FR-7FR) or
3.0 kVA (RV-7FRLL/RV-13FR/RV-20FR).
●
HF interference
Do not use when
– there are voltage peaks on the mains supply greater than 1000 V and longer than 1 μs,
– there are large frequency inverters, transformers, magnetic switches or welding devices in the
vicinity,
– there are radios or televisions in the vicinity.
●
Temperature/Humidity
Do not use when
– the ambient temperature is above 40 °C or below 0 °C,
– the robot is subjected to direct sunlight,
– the air humidity is below 45 % or above 85 %,
– condensation can occur.
●
Vibrations
Do not use when
– the robot is subjected to heavy vibrations or knocks,
– the maximum load of the robot is above 34 m/s² during transport and above 5 m/s² in
operation.
●
Installation location
Do not use when
– subjected to strong electrical or magnetic fields,
– the stand space is very uneven,
– there is heavy contamination from dust and oil mist.