43
3
D
R
IVE
TH
E M
O
T
O
R
Operation by the start command of the
terminal block (external operation)
REMARKS
·
Pr. 178 STF terminal function selection
must be set to "60" (or
Pr. 179 STR terminal function selection
must be set to "61").
(all are initial values)
· When
Pr. 79 Operation mode selection
is set to "3", multi-speed operation (refer to
page 44
) is also made valid.
When the inverter is stopped by
of the operation panel (FR-DU07),
and
are displayed alternately.
1. Turn the start switch (STF or STR) off.
2. The display can be reset by
.
Display
Operation
Stop
10.
Turn the start switch (STF or STR) off.
The motor decelerates according to
Pr. 8
Deceleration time
to stop.
OFF
Flicker ··· Frequency setting complete!!
9.
While the value is flickering,
press to set the frequency.
If you do not press ,the value flickers
for about 5s and the display then returns
to 0.00 (display) Hz. At this time, return to
"Step 3" and set the frequency again.
Forward
rotation Reverse
rotation
Flickering
Содержание FR-F700 Series
Страница 134: ...MEMO ...
