Mitsubishi Electric E80 Series, Руководство по обслуживанию, Страница: 61 / 212

M800/M80/E80 Series Maintenance Manual
1 System Basic Configuration
34 IB-1501273-F
 Example of alarm display (Operation error)
(1) Axis bit of the spindle in which the operation error has occurred is not displayed.
(2) Since the following alarms are displayed in the same state by the LEDs, it is difficult to distinguish them. Check the
details for each alarm on the diagnosis screen.
 "0001 to 0099" and "1000 to 1099" of [M01 Operation error]
 "0100 to 0199" and "1100 to 1199" of [M01 Operation error]

[M01 Operation error], [M00 Auxiliary axis operation error] and [M01 Auxiliary axis operation error]
 "0002" of [M01 Operation error] and "5002" of [M50 Operation warning]
Alarm/Warning code
Displays of 7-segment LEDs (transition)
1L 1R 2L 2R 3L 3R
M01 H/W stroke end axis exists 0006 XYZ
1L 1R 2L 2R 3L 3R
Operation error Error # (lower 3 digits) Axis bit
M01 No operation mode 0101
1L 1R 2L 2R 3L 3R
Operation error Error # (lower 3 digits) No meaning
M00 Aux ax R ret invld at ini 0025 0004
1L 1R 2L 2R 3L 3R
Auxiliary axis
operation error
Error # (lower 3 digits) Axis bit
M01 Aux ax handle ratio too large 0060 0002
1L 1R 2L 2R 3L 3R
Auxiliary axis
operation error
Error # (lower 3 digits) Axis bit
M90 Parameter set mode
1L 1R 2L 2R 3L 3R
Parameter can be set No meaning
M50 Multiple key inputs invalid 5002 0001
1L 1R 2L 2R 3L 3R
Operation error Error # (lower 3 digits) Key code (e.g.)
Note