Mitsubishi Electric AE-200A Скачать руководство пользователя страница 46

Страница: 46 / 192

WT07996X02

[5] HWHP (CAHV, CRHV) unit group

Item

Operation method

Description

ON/OFF

Select [ON] or

[OFF].

Turns on or off the units.

Operation

mode

Select an operation

mode.

Click the desired operation mode.

[Heating], [Heating ECO], [Hot Water], [Anti-freeze]

Set

temperature

Adjust the set

temperature with
the

buttons.

The settable temperature ranges depend on the operation mode and the unit model.

Schedule

Select [Available] or

[Not Available].

Enables/Disables the schedules.

Note: When [Not Available] is set, the scheduled operations are disabled even if

schedules are set.

Hold

Select [ON] or

[OFF].

Enables/Disables the Hold function. When the Hold function is enabled, the

scheduled operations are disabled.

Note: The operations that have been scheduled on the remote controller will also be

disabled.

Note: [Hold type] can be specified in the [Advanced] screen in the initial settings.

Refer to the Instruction Book (Initial Settings) for details.

Note: The Hold function can be used on the AE-200A/AE-50A/EW-50A, but not on the

AE-200E/AE-50E/EW-50E.

Fan Mode

Select [Normal] or

[Snow].

This item will appear only on the operation settings screen for HWHP (CAHV) unit

groups.

The fan can be set to keep rotating even while the unit is stopped to avoid snow

accumulation on the fan guard during the winter.

Select [Normal] to stop the fan while the unit is stopped. Select [Snow] to operate the

fan even while the unit is stopped.

Note: The fan mode for CRHV units cannot be operated.

Prohibit

Remote

Controller

Operation

Click the operation

item to switch the

setting between

“Prohibit” and

“Permit”.

The following operations or setting change can be prohibited from the local remote

controllers and when the Integrated Centralized Control Web is logged in with

general user privileges: ON/OFF, Operation mode, and Set temperature.

: Permit

: Prohibit

Send

Click [Send].

Click to reflect the changes made and return to the group list.

Click [Close].

Click to return to the group list without making any changes.

Close

Click to close the settings

screen without making any

changes.

Send

Click to reflect

the changes

made.

Close

Click to close the settings

screen without making any

changes.

Send

Click to reflect the

changes made.

Group name

ON/OFF

Operation

mode

Set temperature

Hold

Schedule

Prohibit Remote

Controller Operation

Fan Mode

Содержание AE-200A

































































































































































































Результаты поиска

Содержание AE-200A

Отзывы:

Бренды по названию

Популярные бренды

Mitsubishi Electric AE-200A, Инструкция

Результаты поиска

Содержание AE-200A

Отзывы:

Бренды по названию

Популярные бренды