125
WT07996X02
Item
Description
Date to
display the
data
Click [Date] to specify a date to display the data. The date can be specified as daily, monthly, or yearly.
Note: The storage period of the energy use status data is as follows.
Date selection
Data storage period
Year
The current year and the last 24 months
Month
The current month and the last 24 months
Date
The current day and the last 24 months
Comparison
target
Select a block name, group name, address number, or energy management block name to display the
comparison data. (The comparison target selection screen is the same as the display target selection
screen.)
Comparison
date
Specify a date to display the comparison data. (The comparison date selection screen is the same as the
display target date selection screen.)
Display items
for bar graph
Select an item to display its data in the bar graph.
Select a display range from [Block], [Group], [Address], or [Energy management block] to display its data.
The selectable items vary, depending on the display range. Only the items that can be displayed in the
graph appear. Refer to the table below for details.
Display items for bar graph
■
Indoor unit
Display range
Display item
Address
*5
*1 *2
*3 *4
*3
*3
*3
Group
*5
Block
*5
Energy
management block
*5
*1 The electric energy (kWh) consumed by indoor units will appear in the graph. The values are apportioned
based on the setting for “Indoor unit operation apportioning mode”. Refer to the Instruction Book (Initial
Settings) for the “Indoor unit operation apportioning mode” setting.
*2 A small amount of electric energy consumption (kWh) may appear in the graph even when no indoor units
have been operated. This is because the standby electric energy is apportioned, which is normal.
*3 The indoor unit’s cumulative operation time (minute) for the selected item will appear in the graph.
•
“FAN operation time” is the cumulative duration of time in which the indoor unit is ON.
•
“Thermo-ON time (Total/Cool/Heat)” is the cumulative duration of time in which the refrigerant is flowing
into the indoor unit. (Cool: when the Cool mode is selected; Heat: when the Heat mode is selected; Total:
when either mode is selected)
*4 Only “FAN operation time” is displayed for LOSSNAY units.
*5 “Energy Management License Pack” is required. (AE-200E/AE-50E/EW-50E only)
Year selection
Month selection
Date selection
For tenant managers
Chapter 3
