Mitsubishi Electric AE-200A Скачать руководство пользователя страница 41

Страница: 41 / 192

WT07996X02

Item

Operation method

Description

Fan speed of

interlocked

LOSSNAY

Select [High] or

[Low].

Switches the fan speed of the interlocked LOSSNAY units (ventilator).

Schedule

Select [Available] or

[Not Available].

Enables/Disables the schedules.

Note: When [Not Available] is set, the scheduled operations are disabled even if

schedules are set.

Note: The operations that have been scheduled on the remote controller will not

be disabled.

Hold

Select [ON] or

[OFF].

Enables/Disables the Hold function. When the Hold function is enabled, the

scheduled operations are disabled.

Note: The operations that have been scheduled on the remote controller will also be

disabled.

Note: [Hold type] can be specified in the [Advanced] screen in the initial settings.

Refer to the Instruction Book (Initial Settings) for details.

Note: The Hold function can be used on the AE-200A/AE-50A/EW-50A, but not on the

AE-200E/AE-50E/EW-50E.

Filter Sign

Reset

Select [Reset] and

click [Send].

Resets the filter sign. (The cumulative time will be reset.)

When resetting, ensure the check mark is displayed as “ ”.

Note: Reset the filter sign after cleaning the filter.

Note: After the filter sign is reset, it takes up to an hour to clear the filter sign display

on the local remote controllers.

Prohibit

Remote

Controller

Operation

Click the operation

item to switch the

setting between

“Prohibit” and

“Permit”.

The following operations or setting change can be prohibited from the local remote

controllers and when the Integrated Centralized Control Web is logged in with

general user privileges: ON/OFF, Operation mode, Set temperature, Filter Sign

Reset, Air Direction, Fan Speed, and Timer.

: Permit

: Prohibit

Note: If “Timer” operation is prohibited, scheduled operations set on the local remote

controller will be disabled.

Send

Click [Send].

Click to reflect the changes made and return to the group list.

Click [Close].

Click to return to the group list without making any changes.

* After [Send] is clicked, it takes a while for the status of the LOSSNAY unit group icons to be updated.

* If a LOSSNAY unit is interlocked with the operation of indoor units in multiple groups, the LOSSNAY unit may be in operation, even when

the LOSSNAY unit is displayed as “stopped”.

For building managers

Chapter 2

Содержание AE-200A

































































































































































































Результаты поиска

Содержание AE-200A

Отзывы:

Бренды по названию

Популярные бренды

Mitsubishi Electric AE-200A, Инструкция

Результаты поиска

Содержание AE-200A

Отзывы:

Бренды по названию

Популярные бренды