manualshive.com logo in svg

Mitsubishi Electric AE-200A, Инструкция

Поделиться
Скачать
Mitsubishi Electric AE-200A Скачать руководство пользователя страница 119

119

WT07996X02

[2]  LOSSNAY unit (ventilator) group

 

 

Item

Operation method

Description

ON/OFF

Select [ON] or 

[OFF].

Turns on or off the units.

 

Note:  If the units are turned off during the Night Purge operation, the Night Purge 

operation will not be performed until the next day.

Ventilation 

mode

Select a ventilation 

mode.

Click the desired ventilation mode.

[Bypass], [Heat Recovery], [Auto]

 

Note:  This item will not appear during the Night Purge operation.

Fan Speed

Adjust the fan speed 
with the 

 

 buttons.

Auto

 

Note:  During the Night Purge operation, the fan speed can be adjusted but 

 will 

not be displayed.

Humidify

Select [ON], [OFF], 

or [Auto].

Switches the operation status of the humidification function.

 

Note:  This item will not appear during the Night Purge operation.

Schedule

Select [Available] or 

[Not Available].

Enables/Disables the schedules.

  Note:   When [Not Available] is set, the scheduled operations are disabled even if 

schedules are set.

Hold

Select [ON] or 

[OFF].

Enables/Disables the Hold function. When the Hold function is enabled, the 

scheduled operations are disabled.

 

Note:  The operations that have been scheduled on the remote controller will also be 

disabled.

 

Note:  [Hold type] can be specified in the [Advanced] screen in the initial settings. 

Refer to the Instruction Book (Initial Settings) for details.

 

Note:  The Hold function can be used on the AE-200A/AE-50A/EW-50A, but not on the 

AE-200E/AE-50E/EW-50E.

Filter Sign 

Reset

Select [Reset] and 

click [Send].

Resets the filter sign. (The cumulative time will be reset.)

When resetting, ensure the check mark is displayed as “   ”.

 

Note:  Reset the filter sign after cleaning the filter.

 

Note:  After the filter sign is reset, it takes up to an hour to clear the filter sign display 

on the local remote controllers.

Prohibit 

Remote 

Controller 

Operation

Click the operation 

item to switch the 

setting between 

“Prohibit” and 

“Permit”.

The following operations or setting change can be prohibited from the local remote 

controllers and when the Integrated Centralized Control Web is logged in with 

general user privileges: ON/OFF and Filter Sign Reset.

 : Permit         

 : Prohibit

Send

Click [Send].

Click to reflect the changes made and return to the group list.

Close

Click [Close].

Click to return to the group list without making any changes.

Close

Click to close the settings 

screen without making any 

changes.

Send

Click to reflect 

the changes 

made.

Close

Click to close the settings 

screen without making any 

changes.

Humidify

Filter Sign Reset

Click to reset the 

filter sign.

Send

Click to reflect the 

changes made.

Group name

ON/OFF

Ventilation 

mode

Fan Speed

Hold

Schedule

Prohibit Remote 

Controller Operation

For tenant managers

Chapter 3

Содержание AE-200A

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды