Mitsubishi Electric AE-200A, Инструкция

Страница: 102 / 192

102
WT07996X02
Item Description
Energy management
data
[Data type: 1-month intervals]
Row Item Format
1st File Type 504
2nd Data range Start year and month + “–” + End year and month
3rd Item *1*2
“Month,Data1(51),...Data1(100),Data3(51),...Data3(100),
OutdoorTemp(51),...OutdoorTemp(100),CoolSetTemp(1),...CoolSetTemp(50),
HeatSetTemp(1),...HeatSetTemp(50),RoomTemp(1),...RoomTemp(50),
FanTime(1),...FanTime(50),CoolTime(1),...CoolTime(50),
HeatTime(1),...HeatTime(50),ThermoTime(1),...ThermoTime(50),
CoolThermoTime(1),...CoolThermoTime(50),
HeatThermoTime(1),...HeatThermoTime(50),
SaveValue(1),...SaveValue(50),CoolSaveValue(1),...CoolSaveValue(50),
HeatSaveValue(1),...HeatSaveValue(50),
ApporionedElectricEnergy(1),...ApporionedElectricEnergy(50).
TargetElectricEnergy(1),...TargetElectricEnergy(50),
MCP1(0),...MCP1(50),MCP2(0),...MCP2(50),MCP3(0),...MCP3(50),
MCP4(0),...MCP4(50),MCT1(1),...MCT1(50),MCT2(1),...MCT2(50),
AHC1(201),...AHC1(250),AHC2(201),...AHC2(250),
MCP1,MCP2,MCP3,MCP4 *3 ”
4th
Measurement
unit
Item Unit
ApportionedElectricEnergy, TargetElectricEnergy kWh
Data1, Data3 -
OutdoorTemp, CoolSetTemp, HeatSetTemp,
RoomTemp
ºC, ºF
FanTime, CoolTime, HeatTime, ThermoTime,
CoolThermoTime, HeatThermoTime, SaveValue,
CoolSaveValue, HeatSaveValue
Minute
MCP (PI controller/Built-in Pulse Input (PI))
kWh, m3, MJ,
Blank
MCT (AI controller) ºC, ºF, %
AHC (Advanced HVAC CONTROLLER) ºC, ºF
5th–29th Data
*1*2*4*5*6*7
yyyy/mm, Data 1 (51), ... (100), Data 3 (51), ... (100),
Outdoor temperature (51), ... (100), Cooling set temperature (1), ... (50),
Heating set temperature (1), ... (50), Room temperature (1), ... (50),
Fan operation time (1), ... (50), Cooling operation time (1), ... (50),
Heating operation time (1), ... (50), Thermo-ON time (1), ... (50),
Cooling Thermo-ON time (1), ... (50), Heating Thermo-ON time (1), ... (50),
Capacity-save value (1), ... (50), Cooling capacity-save value (1), ... (50),
Heating capacity-save value (1), ... (50), Apporioned electric energy (1), ... (50),
Target electric energy (1), ... (50), MCP 1 (1), ... (50), MCP 2 (1), ... (50),
MCP 3 (1), ... (50), MCP 4 (1), ... (50), MCT 1 (1), ... (50), MCT 2 (1), ... (50),
AHC temperature 1 (201), ... (250), AHC temperature 2 (201), ... (250), MCP 1,
MCP 2, MCP 3, MCP 4
*1 The numbers shown after “MCP” and “MCT” indicate channel No.
*2 The numbers in the parentheses indicate M-NET addresses.
*3 The measurement value of the built-in Pulse Input (PI) to AE-200/AE-50/EW-50 is only MCP1–
MCP4, and the addresses are not displayed.
*4 “Outdoor temperature,” “Cooling set temperature,” “Heating set temperature,” and “Room
temperature” in the data are the average monthly values of the average temperature values
obtained every day.
*5 “MCT 1” and “MCT 2” in the data are the average monthly values of the average temperature or
humidity values obtained every day.
*6 The value will not appear if the data does not exist.
*7 Each file contains up to 25 data (25-month worth of data).