Mita PointSource Ai 4040, Инструкция по эксплуатации

Страница: 137 / 220

132
Copy default setting Page Content of copy default setting
1
Exposure mode
136
This is the copy exposure selection mode. Auto (automatic exposure mode) or manual
(manual exposure mode) can be selected.
2
Exposure steps
136
7 or 13 exposure levels can be set for the manual exposure mode.
3
Auto exposure adjustment
136
If the overall exposure in the auto exposure mode is too light/dark, use this to adjust it.
4
Manual exposure adjustment
137
If the overall exposure in the manual exposure mode is too light/dark, use this to adjust it.
It can be set separately for each mode; "Text", "Photo" and "Mixed".
5
Quality
137
Initial value for the copy quality mode can be selected.
6
Paper selection
137
Select whether paper of the same size as the original is selected automatically when it is
set, or whether the size of the paper is selected manually.
7
Job Programming
138
"Regular" or "Off the platen" can be selected for the program mode setting.
"Regular": Any of the program number "1" to "7" can be selected by touching the program
key.
"Off the platen": The content of program "1" can be accessed automatically by touching
program key. Copying is possible as it is.
8
Default drawer
138
A frequently-used drawer can be selected automatically. When the Reset key is pressed
without setting an original, etc., the specified drawer in this mode can be selected.
* The stack bypass tray can not be set as a default drawer.
9
Zoom mode
138
The size zoom mode (page 49) or standard zoom mode (page 48) can be selected for
enlarge/reduced copying (Zoom mode).
0
Copy limit: with # keys
139
The pre-set limit on the number of copies can be set for one copying operation is 999,
but the limit can be lowered.
!
Custom border erase size
139
Set the sizes of the originals for "custom size" of border erase modes (page 64). Borders
outside the defined area will be erased.
@
F&B p. margin
140
Whether the front & back page margin is to be displayed or not for the margin copy
setting screen on page 56 can be set.
#
Drawer for insert sheet
140
The drawer of the insert sheets to be set can be selected in the inter mode (page 67).
$
Rotate sort
140
Set the normal sort copy or rotate sort copy by touching the sort key. The direction of
each paper can be changed in the rotate sort copy so that it makes easier to sort the
copies.
* This setting is not displayed when the copier is equipped with the optional finisher.
%
Create shortcut (#1, #2)
141
The frequently-used function keys can be displayed on the basic screen. This makes
easier to select the frequently used function.
●
Copy default setting
^
Customize GUI #1 - #5
The frequently-used function will be displayed soon after touching the "Added" key if it is
set in this mode, so that it makes easier to set the functions. Up to five functions can be
set.
141