Mircom Fire-Link ISD-1000 Series, Инструкция по установке и эксплуатации

Страница: 39 / 56

Installation and Programming Manual
Mircom Technologies Inc All Rights Reserved LT-1034 Rev.1
Page 38 of 54
Lapse time can be set to 90 sec (Canadian default), 120, 200 (US default), 300 seconds, or ‘Never Reported’.
These times are approximate only dependent on ISD quantities on network, power line conditions, etc.
If you choose any of the lapse time readings, other than the default, ‘ NXT ’ will scroll you through the 120, 200 or
300 second choices. Press ‘ ENT ’ to accept the amount.
When ‘
MISSING DEVICES ’ is selected from the trouble menu, if you choose to select ‘ NEVER REPORTED ’ and
you choose ‘ ENT’ to proceed, the next menu will be displayed as:
If you select ‘
BYPASS ISD’ , you will be shown a list of enrolled ISDs:
If you select ‘
CHG ’, this will invert the ISD Address selection from ‘ Enabled’ to ‘BYPASSED’ or visa-versa. Here
‘ BYPASSED ’ means that the ‘Missing ISD Trouble’ notification on the NMC will be disabled for this ISD, or
multiple ISDs, chosen. Bypassing will create a trouble condition on the NMC until the bypassed ISD devices are
enabled once more.
If
‘MISS’G NEVER RPTD ’ is chosen, then a WARNING will appear stating that this action contravenes UL, ULC
and AHJ regulations.
If ‘
CONT ’ is selected, then a ‘ COMPLETE! ’ notification will appear.
WARNING: The NMC will NOT show a trouble condition when this option is selected.
WARNING: THIS MAY
CONTRAVENE UL,
ULC
AND AHJ REGS.
BYPASS ISD
>MISS’G NEVER RPTD
UP DWN ENT BCK
RM209 ENABLED
>RM300 BYPASSED
RM301 ENABLED
UP DWN CHG BCK
NXT ENT BCK
RM209 ENABLED
>RM300 ENABLED
RM301 ENABLED
UP DWN CHG BCK >BYPASS ISD
MISS’G NEVER RPTD
UP DWN ENT BCK
DATE/TIME LOSS
UP DWN ENT BCK >MISSING DEVICES
LOW/MISSING BAT
ISD AC LOSS
UP DWN ENT BCK