Installation and Programming Manual
Mircom Technologies Inc
All Rights Reserved
LT-1034 Rev.1
Page 33 of 54
Use
<
and
>
to move the cursor over the ADDRESS (suite number) and/or VID number to EDIT.
Press
ENT
to save changes. Press
BCK
to return to the previous screen(s).
Note:
Selecting
<DEL>
while a device is highlighted will result in the following action:
- If
ENROLLED
, it will be removed from the NMC list.
- If
MISSING,
it will be removed from the NMC list
- If
UNKNOWN,
it will be added to the
MISSING
category.
Note: Enrolled ISD units only will have their Green LED ‘Flicker’ during communications with the NMC.
5.14 Removing an ISD from the Network
If a working ISD is to be removed from the network and is to be reused at a later date, or used on a different
network, it should be removed from the NMC network to which it is currently assigned. If the ISD is not removed, it
will display as a
Missing
device and put the NMC into trouble. If used in another building’s network without being
removed, it will show up as an
Unknown
device.
Use this option to remove an inoperable ISD unit as well before installing a replacement unit. Leave or re-install
the ISD into any AC outlet.
Select [
CONFIGURE
]
[
CONFIGURE ISD
]
[
REMOVE ISDS
].
Use
<
or
>
to select the desired unit. Press
ENT
to commence ISD removal.
NOTICE: TO PURGE THE ENTIRE ISD LIST FROM THE NMC, PRESS ‘8’ AND ‘9’
SIMULTANEOUSLY WHILE IN THE ‘REMOVE ISDS’ menu. ISD addresses will be shown being
removed.
5.15 Adding an ISD VID number manually
Access Level 3
This process will
add an ISD
manually
to the network via the NMC Keypad
without
retrieving the VID #
automatically.
.
Select [
CONFIGURE
]
[
CONFIGURE ISD
]
[
MANUAL SET ADDR
]
Enter the 5 digit
ADDRESS
of the ISD (suite number or room number) followed by
ENT
. The suite number should
be entered such as:
00103
or
0206B
. Refer to
Section 5.10
if you wish to designate it as a ‘Message Unit’.
NETWORK ID: XXXX
ADDRESS: XXXXX
VID: XXXXXXXX
< > ENT BCK
>MANUAL SET ADDR
AUTO SET ADDR
EDIT ADDR
UP DWN ENT BCK
CONFIGURE NMC
>CONFIGURE ISD
UP DWN ENT BCK
ADMINISTRATION
TESTS
>CONFIGURE
UP DWN ENT BCK
NETWORK ID: XXXXX
ADDRESS: XXXXX
VID: XXXXXXXX
< > ENT BCK
EDIT ADDR
>REMOVE ISDS
AUTO-PRGM ISDS
UP DWN ENT BCK
CONFIGURE NMC
>CONFIGURE ISD
UP DWN ENT BCK
ADMINISTRATION
TESTS
>CONFIGURE
UP DWN ENT BCK
Содержание Fire-Link ISD-1000 Series
Страница 2: ......
