Minolta PagePro 25, Руководство пользователя

Страница: 13 / 263

Introduction 1
Rev. 3.1.1/16.07.99 PagePro 25 1-5
1.3 Working safely with your laser printer
Notes on your safety and operating safety
Working improperly with the printer can result in hazards to health,
electrical shock and even fires. Before you unpack the laser printer, you
should make yourself familiar with this information on your safety and
operating safety.
CAUTION
Observe the following information:
➜ Make certain that the power cord is correctly plugged into the socket
and that the socket is at all times visible and freely accessible.
➜ Do not pull on the cable to pull the power plug out of the socket, as this
may damage the cable. The result could be electrical shock or a fire.
➜ Remove the power plug from the socket if the machine will not be in
use for an extended period of time.
➜ Do not remove the power cord from the socket with wet hands, as this
may result in electrical shock.
➜ Do not move the unit unless the power cord has been removed from
the socket. Otherwise you may damage the cable. The result could be
a short circuit or a fire.
➜ Do not place any heavy objects on the power cord. Do not pull or kink
the cable, as this can result in damage to the cable. The result could
be electrical shock or a fire.
➜ Make certain that the machine is not standing on a cable of another
machine, as this can result in damage to that cable. The result could
be a fire or improper functioning of the unit in question.
➜ Make sure that the power supply to the unit has the correct voltage.
Otherwise the result could be a fire or electrical shock.
➜ Turn the unit off immediately and unplug the power cord if the power
supply cable is damaged. Failure to do so could result in a fire or
electrical shock. Inform your customer service technical specialist.
➜ Use only extension cords that are designed for at least the maximum
power of the machine. Extension cords with lower ratings can result in
the unit overheating and can even lead to a fire.