4
4-3
Pi5500 on a NetWare 5.x network with NDPS
In Pi5500 Setup, make sure you have enabled TCP/IP (page 2-16) and LPD printing
(page 2-21) on the Pi5500. You can ping the Pi5500 (page 4-21) to verify that TCP/IP
communication is successful.
Setting up the Pi5500 on a NetWare 5.x network
Depending on the security needs at your organization, you can set up the Pi5500 as a
Public Access printer or a Controlled Access printer. The following procedure describes
setting up a Public Access printer. You can then convert this type of printer to
Controlled Access if necessary. For more information, see your NetWare
documentation.
N
OTE
:
In the following procedure, “Atlas” is an example of an NDPS Manager name;
“Aero” is an example of a Printer Agent name.
T
O
SET
UP
THE
P
I
5500
AS
A
P
UBLIC
A
CCESS
PRINTER
1.
In NetWare Administrator, double-click the NDPS Manager object you have created.
2.
In the Details window for the NDPS Manager object, click Printer Agent List.
The list of Printer Agents appears.
3.
Click New.
The Create Printer Agent dialog box appears.
4.
In the Printer Agent (PA) Name field, enter a name.
5.
Under Gateway Types, select Novell Printer Gateway, and click OK.
