2
2-9
Network Setup options
Clear Each Scan Job
After 1 day/After 1 week/Manually/Now [After 1 day]
Specify how you want to remove scanned data from the HDD. If you select Manually,
the scanned data remains on the HDD until specifically deleted, or until all scanned
jobs are cleared by the Administrator.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select No to return to the
main Setup menu without making any changes.
Network Setup options
Network Setup configures the Pi5500 to receive print jobs over the network systems
that will be used at your site.
If the Pi5500 is configured to enable more than one protocol, it automatically switches
to the correct protocol when it receives a print job. When the parallel port and one or
two network ports are enabled, print jobs can be received over all of those ports at the
same time.
In the Setup menu, choose Network Setup.
In Network Setup, you specify the network addresses and names to be used by
workstations, servers, and the Pi5500 when they communicate with each other.
The Network Setup menu includes three submenus that let you choose port types,
protocols, and network services. You must perform Port Setup and enable at least
one port.
For each item you enable, you are prompted to enter settings for that item.
Default values, where applicable, appear in square brackets.
You need to display and select options only for the network systems that are currently
used at your site. If your network requirements change, you can change the Network
Setup at any time.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Exit Network Setup
Port Setup
Protocol Setup
Service Setup
Network Setup
