2
2-46
Setting up the Pi5500
Administrative functions in the Setup menu
The remaining options in the Setup menu allow you manage print jobs, but are not
required for printing:
•
Job Log Setup
allows you to specify whether the Pi5500 prints and clears its log of
printed jobs automatically. For details, see the following section.
•
Change Password
enables you to create or change an administrator password on the
Pi5500 so that casual users cannot enter the Setup menus and change Pi5500
settings without permission. In addition, an administrator password controls remote
job management functions via Fiery WebSpooler. A password created using the
Setup menu prevents Pi5500 users from reprinting print jobs, moving print jobs
(changing their priority or their queue), and deleting or configuring jobs, other than
their own. For details, see the
Job Management Guide
.
The administrator password also controls printer driver defaults for printer drivers
installed with Point and Print on Windows NT 4.0 clients. For information on
installing printer drivers with Point and Print, see
Getting Started
.
•
Clear Server
clears all queued print jobs from the Pi5500—jobs in the Pi5500 Print,
Hold, and Printed queues. The Job Log is cleared at the same time. If an
administrator password has been set, unauthorized users will not see this command
(or any of the administrative or Setup options).
•
Factory Defaults
clears all queued jobs and resets the Pi5500 Setup options to the
factory defaults. Once the Pi5500 is reset, you select the language in which to
display Setup menus and system messages.
