Minolta EP4000, Общий, Механический/Электрический

Страница: 76 / 392

Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-62
(2) Inch Areas
<Paper Stack Lifting>
D
When the Paper Descent Key (UN5/6) is pressed*
1
after the drawer has been slid
into the copier, it energizes the Lift-Up Motor (M13/14) and the motor starts turning
forward.
D
The rotation of the motor is transmitted via a gear train to the worm gear and the
Paper Lifting Arm mounted on the same shaft, raising the Paper Lifting Plate. This
raises the paper stack.
D
When the top of the paper stack is pressed against the Paper Take-Up Roll and the
paper stack is further raised, the light blocking plate of the Paper Take-Up Roll Assy
blocks the Lift-Up Sensor (PC65/66). This deenergizes the Lift-Up Motor and the
paper stack raising motion is completed.
D
As the paper is consumed and the top level of the paper stack lowers, the Lift-Up
Sensor is unblocked. Then, the Lift-Up Motor is energized again to raise the paper
stack until the Lift-Up Sensor is blocked again. This means that a constant pressure
is maintained between the paper and the Paper Take-Up Roll regardless of the
amount of paper still available for use.
*1: The Lift-Up Motor is energized at the following timings, in addition to the press of the
Paper Descent Key (UN5/6).
D
Turning ON the Power Switch
D
Opening and closing the door
D
Operating the panel
D
Detecting a sheet of paper on the Multi Bypass Table
D
Detecting an original in the Duplexing Document
Feeder
D
Raising and lowering the Original Cover, etc.
1st/2nd Drawer Paper
Lift-Up Motor M13/14
Paper Lifting Arm
1st/2nd Drawer Paper Descent Key UN5/6
Worm Gear
1134M032EA