Minolta EP4000, Общий, Механический/Электрический

Страница: 255 / 392

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-31
Tech. Rep. Mode
"
Counter
Touch Panel
Display
Operation
Consumables Enter the count of the Copy Kit counter. When the count, which is increased
by 1 each time a copy is made, reaches the set count, the maintenance call
reminder message, together with maintenance code “M4,” is displayed.
Note: Whether the maintenance call reminder message is given or not de-
pends on the setting made for “Copy Kit Counter” of “Tech. Rep.
Choice.”
D
Toner collect
Enter the count of the Toner Collect counter. When the count, which increases
by 1 each time a copy is made, reaches the set count, the maintenance code
“M2” is displayed. After wards, the machine stops operating after 10k copies
are made and the maintenance call reminder message is displayed.
Note: The set count should be no more than 200k for U.S.A. areas, 180k for
European areas.
<Setting a Count>
1. Using the
B
or
Y
key, select the counter to be set.
2. Enter the value from the 10-Key Pad.
<Clearing the Set Value/Count>
Using the
B
or
Y
key, highlight the count to be cleared, then press the Clear
key.
Note: If a count is accidentally cleared, pressing the Interrupt key will undo the
clear operation.
<Resetting the Counter>
Using the
B
/
Y
key, select the counter corresponding to the displayed mainte-
nance code, then press the clear key.
Auto CPU Reset Shows whether a CPU overrun has occurred in different CPU-mounted boards
which are monitored by the watchdog function.
Display Description Display Description
MSC/Panel PWB-B
ADF Original System Opt.
Master PWB-A Sorter Exit System Opt.
SCP PWB-F
Data
Controller
D-102 (PWB-A)
Note: This counter does not count the number of CPU overruns which have
occurred. “1” indicates that there was a CPU overrun, while “0” indi-
cates there was no CPU overrun.
<Clearing the Count>
Using the
B
or
Y
key, highlight the count to be cleared, then press the Clear
key.
Note: If a count is accidentally cleared, pressing the Interrupt key will undo the
clear operation.