Minolta EP4000, Общий, Механический/Электрический

Страница: 11 / 392

Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
G-5
1149SBG0300A
PRECAUTIONS FOR USE 3
To ensure that the copier is used in an optimum condition, observe the following pre-
cautions.
F
Never place a heavy object on the copier or subject the copier to shocks.
F
Insert the power plug all the way into the outlet.
F
Do not attempt to remove any panel or cover which is secured while the copier is
making copies.
F
Do not turn OFF the Power Switch while the copier is making copies.
F
Provide good ventilation when making a large number of copies continuously.
F
Never use flammable sprays near the copier.
F
If the copier becomes inordinately hot or produces abnormal noise, turn it OFF and
unplug it.
F
Do not turn ON the Power Switch at the same time when you plug the power cord
into the outlet.
F
When unplugging the power cord, do not pull on the cord; hold the plug and pull
it out.
F
Do not bring any magnetized object near the copier.
F
Do not place a vase or vessel containing water on the copier.
F
Be sure to turn OFF the Power Switch at the end of the workday or upon power
failure.
F
Use care not to drop paper clips, staples, or other small pieces of metal into the
copier.
J
Operating Environment
The operating environmental requirements of the copier are as follows.
D
Temperature: 10
°
C to 30
°
C with a fluctuation of 10
°
C per hour
D
Humidity: 15% to 85% RH with a fluctuation of 10% RH per hour
J
Power Requirements
The power source voltage requirements are as follows.
D
Voltage Fluctuation: AC115/120/127/220-240V
"
10% (Copying performance assured)
)
6%, –10% (Only AC 127V)
–15% (Paper feeding performance assured)
D
Frequency Fluctuation: 50/60 Hz
"
0.3%