Overview of rotorhead components before
assembly.
For mounting of the head, it is recommen-
ded to add a drop of oil into the shaft hole
of the hub. Carefully push the head onto
the shaft straight down, never turn the
hub on the shaft (risk of seizing). When
the bolt holes are aligned
fi
t the jesus bolt
D538 and tighten with a lock nut M3 008.
The rod with two ball links is attached to
the blade grip with a hex screw M3x30
D337 and the stepped bush D540 using
Loctite.
Screw the ball link at the other end to the
swash plate with Loctite on both threads
(outer and inner thread.)
The SRC rod is attached to the bladegrip
with a hex screw M3x30 D337 and a bush
D542 using Loctite.
Screw the ball link at the other end to the
swash plate with Loctite on both threads
(outer and inner threads.)
Check the length of both rods so that the
angle of the blades are about zero degree
pitch. The
fi
nal adjustment will be done
during setting up of the
fl
ybarless system.
