Fit the inner bottom plate holders. First
push two lens screws M3x8 024 from
underside through the bottom plate and
fi
t from above the two aluminum spacer
shims H30.
Then add the two 90 degree angle bra-
ckets H29 and attach with two lens screws
M3x6 D199 and four nuts D547.
Adjust the bottom plate to be parallel to
the lower edge of the lower frame. If not,
adjust the connecting brackets by moving
their position in slotted holes.
A perfect
fi
t for the canopy can be set
later.
Standard servos are good enough for the
Heli Baby, there is no advantage to using
expensive servos in this model.
Prepare the servo arms as single arms
(remove any additional arms from the horn
with side cutters or a sanding disc).
