Minicom 0SU70068, Руководство пользователя

Страница: 14 / 63

Installation
Mounting the PX Unit
14
| PX
Figure 2 – PX Unit Right Side Panel
The following table describes the functionality of the elements of the PX panels.
Element Functionality
RJ45 port
For connecting PX to your PoE enabled network switch via a CAT5 network cable.
LEDs
The two LEDs on either side of the RJ45 connector:
One illuminates green to indicate that the PX is connected to the PoE network switch.
The other illuminates green to indicated that the target server connected to this particular
PX is being accessed.
Power port
For connecting the PX unit to a power adapter, where relevant.
Reset button
Pressing this button reboots the PX USB with the factory default settings.
USB/Video
port
26-pin port for connecting the PX to the target server via a USB/Video cable.
Power LED
Indicates the state of the PX unit: Green indicates that the unit is powered on; Red
indicates that the unit is powered off.
2.3 Mounting the PX Unit
You can connect the PX unit to a server rack, using the supplied rack mounting
brackets.
Mount the PX unit into a rack as follows:
1. Assemble the bracket.
2. Connect the bracket to the PX unit.
3. Connect the bracket to the rack.
2.3.1
Rack Mounting Safety Considerations
When mounting PX onto a rack, avoid the following conditions:

Elevated operating ambient temperature
– The operating ambient temperature of
the rack environment may be greater than the room ambient temperature.
Therefore, take special care when installing the unit in a closed or multi-unit rack
USB/Video Port