![background image](http://html1.mh-extra.com/html/minghe-instruments/mhs-5200a-series/mhs-5200a-series_operating-manual_1801423011.webp)
10
In the main interface
,
Press
或
,
Adjusted to offset adjustment options
shown in Figure 2-7
,
Then click
,
The "*" are switched to the second
row
,
Click
or
To move the cursor
,
Then"ADJUST" knob to adjust the offset
parameter.
Drawing 2-7
5
、
Duty cycle setting CH1
In the main interface
,
Press
or
,
Adjusted to duty cycle adjustment options
shown in Figure 2-8
,
Then click
,
The "*" are switched to the second
row, click
or
To move the cursor
,
Then"ADJUST" knob to adjust the offset
parameter.
Drawing2-8
5
、
Setting the phase difference between the two channels
In the main interface
,
Press
or
,
Adjusting the phase adjustment options shown
in Figure 2-9, Then click
,
The "*" are switched to the second row
,
Click
or
To move the cursor
,
Then"ADJUST" knob to adjust the bias
parameter, you need special note is the phase difference only in the same frequency
CH1 and CH2 frequency when it makes sense.