Minebea CSD-701B, Инструкция по эксплуатации

Страница: 71 / 157

58
7 − 3. How to use the filter
The instrument has the digital filter to which the data converted into digital is stabilized by the
calculation processing.

Warning
●
When setting filter is not suitable, correct measurement can’t be made
and it may cause an unexpected accident, so care should be taken
fully.
7 − 3 − 1. Digital filter
The digital filter for the instrument can be set from “00000” to “00007”.
The averaged − out times of digital filter can be decided from the set value (Related function
F − 04)
As for default, “00004” is selected.
The relations between the setting and the averaged − out times are as follows
：
(
Averaged − out times
)＝
2
n
n
：
Set value
For example, when “00004” is selected, averaged out times is as follows
：
(
Averaged − out times
) ＝
2
4
＝
16
(
Times
)
The tendency to the characteristic by the leveling frequency is shown in the table below.
：
Averaged out times low high
Resist to noise rapid stable
Response speed quick slow
7 − 4. Zero tracking
The instrument prepares the zero tracking in order to compensate for slow drift of zero.

●
Effective only when the A/Z mode is selected. (Related function
F − 70)
7 − 4 − 1. What is zero tracking?
D Zero tracking is a function to cancel the slow drift of zero within the constant conditions,
and also to follow the zero point of the instrument in order to stabilize zero point.
D When the data variation within the set time with function F − 09 is within the set value set
with the function F − 08 against the zero point, then the input will be cancelled as the zero
point. However, when the zero point compensation for the total “
±
10 % of the maximum
display value” at the zero tracking and zero set are completed until that time, the further
directional zero tracking will not executed.