Minebea Intec Puro LargeCount EF-LT P1, Руководство по эксплуатации

Страница: 48 / 80

— METRO Metrology (see Chapter 5.3.4.1 )
— UNIT Weight units (see Chapter 5.3.4.2 )
— OP.FUNC Operating functions (see Chapter 5.3.4.3 )
— PRINT Printer outputs (see Chapter 5.3.4.4 )
— PRN.COM Printer port communication (see
Chapter
5.3.4.5 )
— PC.OUT PC output (see Chapter 5.3.4.6 )
— PC.COM PC port communication (see Chapter 5.3.4.7 )
— CAL.ADJ Calibration/adjustment (see Chapter 5.3.4.8 )
— AD.CON2 ADC configuration of the second scale, is only
displayed if [AD.CON2] (see Chapter 5.3.4.9 )
has been activated previously
— INFO Info (display of serial number and type
designation)(see Chapter
5.3.4.10 )
— SECURE Block menu items (see Chapter 5.3.4.11 )
— E.N.D. Exiting menus
— STAB.RA Stability range value for both scales
— 0.5D 1/2 d
— 1D 1 d*
— 2D 2 d
— 4D 4 d
— FILTER Adjustment filter valid for both scales
— LOW Lower accuracy, short stabilization time
— MED Normal accuracy, average stabilization time*
— HI High accuracy, long stabilization time
— A.ZERO.T Automatic zero point tracking valid for both
scales
— OFF Switching off
— 0.5D Drift up to 0.5 d/second*
— 1D Drift up to 1 d/second
— 3D Drift up to 3 d/second
— AUT.OFF Counter for automatic switching off
— OFF Switching off*
— 1 MIN Switching off after 1 minute with no activity
— 5 MIN Switching off after 5 minutes with no activity
— 10 MIN Switching off after 10 minutes with no activity
— RESET Factory settings
— NO not reset*
— YES activated
— END Exit menu level
5.3.4 Menu navigation
Overview of the first menu level:
5.3.4.1 [METRO] menu selection
The functions of the displays and scales can be adjusted in this menu.
Factory settings are marked with "*"
METRO
2. To exit the menu elements, press the (Yes) key to access the next menu item,
or the (No) key to access the top level of the current menu.
Compact scale Puro® LargeCount 5 Operating
EN-46 Minebea Intec