— A.TARE
Automatic tare
— OFF
deactivated* (default setting)
— ON
first stable weight ≥ 2 d is tared
— ON-ACC
Test: Each stable weight within the acceptance
values is tared. This means that the automatic
tare is not just carried out once!
— A.PRINT
automatic printing
— OFF
deactivated* (default setting)
5.2.6
Automatic tare
The application icon
is displayed in the "Weight" display.
Weight
5.2.6.1
Menu selection
OP.FUNC
5.2.6.2
Execution mode
Standard performance:
-
The first weight that is placed on the weighing pan is tared if ≥ 2 d.
-
If there is no load on the scale (< 2 d), the tare memory is deleted.
Performance during "checking":
-
First option [ON]:
The first weight (≥ 2 d) that is placed on the weighing pan is tared
-
Second option [ON-ACC]:
In the event of load ≥ 2 d, only stable values within the tolerance range are tared.
Here, each weight in the accepted limit range is tared.
This function is carried out before the automatic printing and also before the automatic
totalizing. The automatic tare has a higher priority than printing and totalizing. The first
applied weight is tared, the second is adopted into the totalizing memory and
automatically printed out if "Automatic Printing" and "Automatic Totalizing" are selected
in the menu.
"Automatic tare" is not carried out if the menu is activated or an initialization is being
carried out.
"Automatic tare" is deactivated if a preset tare value has been entered or a product with
preset tare value has been activated.
5.2.7
Automatic Printing
Printing is carried out automatically
once
if the net weight on the weighing pan is ≥ 2 d.
If the weight is removed from the weighing pan and the net weight is < d, the next net
weight ≥ 2 d generates printing again.
5.2.7.1
Menu selection
Specify conditions under the menu item [PRINT] (printing):
Compact scale Puro® LargeCount
5 Operating
EN-32
Minebea Intec
