5.2.4
Checking application
For the Checking application, there are indicator LEDs that show the current range.
5.2.4.1
Activating the checking application
While the Counting application is being performed, the checking applications can be
activated via the
key.
5.2.4.2
Checking weight values
-
Initializing Checking application (see Chapter
)
-
Execution mode (see Chapter
)
-
Print outs (see Chapter
5.2.4.2.1
Initializing checking
Pressing and holding the
key will generate a minus algebraic sign in the entry mode
in the "Count" display.
Pressing and holding the
(Exit) key will stop the initialization process
immediately, without saving a new entry or limit.
Press and hold the
key.
Weight
Piece Weight
The activated checking mode is displayed for approx. 2 seconds in the "PW"
display. The "Count" display is dark.
After this waiting time the next mode is displayed and so on. If the
key is
released, the mode displayed in the "PW" display is selected.
The following selection is possible:
[OFF]
Checking is switched off.
[WEIGHT]
Check Weighing is activated
[COUNT]
Check Counting is activated
If the Check Weighing application [WEIGHT] is activated and the Counting
application has not been initialized, the following application icons will be
displayed in the "Weight" display:
.
If the Counting application [COUNT] has been initialized, the Counting
application icon will also be displayed:
.
If the Check Counting application [COUNT] is activated and the Counting
application has been initialized, the following application icons will be displayed
in the "Weight" display:
.
[CHECK] is shown in the "Weight" display.
5 Operating
Compact scale Puro® LargeCount
Minebea Intec
EN-23
