Minebea Intec Puro LargeCount EF-LT P1, Руководство по эксплуатации

Страница: 22 / 80

While the key is held down, the unit changes and after around 2 seconds the next unit
is displayed, and so on, until the key is released.
This is how the switched units are displayed in the "Weight" display and in the "PW"
display:
Units in the "Weight" display Units in the "PW" display
Kilogram Gram
Gram Gram
Pound Ounce
Ounce Ounce
Pound: Ounce Ounce
5.2.2.5 Printouts
The elements to be printed are configured in the menu.
Printout Description
5.003 g N
- 0.003 g N
2.003 g G
2.003 g G#
1.003 g T
0.010 g PT
- 0.010 ! G
Positive net weight value
Negative net weight value
Positive measured gross weight value
Positive calculated gross weight value
Tare weight value (measured value)
Preset tare value (entered value)
Stable gross weight below zero
5.2.3 Counting application
The scale starts with "Counting". If a sample weight had been specified before switching
off the device, the device starts with this sample weight.
The Counting application is always active. However, there is the option for this application
not to be initialized.
If no sample weight has been initialized, both displays show [0.] and the application icon
(weighing) is displayed in the "Weight" display.
The device starts with the Totalizing application activated.
Weight
Counting is uninitialized
Weight
Counting is initialized
5.2.3.1 Initializing the Counting application
- Initialization with a known reference quantity (see Chapter 5.2.3.1.1 )
- Initialization with a known sample weight (see Chapter 5.2.3.1.2 )
Compact scale Puro® LargeCount 5 Operating
EN-20 Minebea Intec