Mindray VS 8A, Руководство оператора

Страница: 67 / 278

6 - 1
6
Networked Monitoring
6.1 Network Introduction
You can connect the monitor to the central monitoring system (CMS), and eGateway
through wired LAN or wireless LAN.
6.2 Network Safety Information
CAUTION
•
Wireless network designing, deploying, debugging, and maintenance should
be executed by Mindray service personnel or authorized technicians.
•
Always set the wireless network according to local wireless regulations.
•
Using 5G frequency band is recommended whenever possible. There are
more interference sources in 2.4G frequency band.
•
Private APs and wireless routers are not allowed. These devices may cause
radio interference and result in monitor and CMS data loss.
•
Data communication must be performed within a closed network or within a
virtually isolated network provided by a hospital for all network functions.
The hospital is responsible for ensuring the security of the virtually isolated
network.
•
WPA2-PSK and WPA2-Enterprise verification and encryption should be used
if possible. Otherwise, the equipment may not be able to work or patient
information may be divulged. WPA2-Enterprise and a long password are
recommended.
•
Keep network authentication information, for example password, safe,
protecting the network from being accessed by unauthorized users.
•
Do not connect non-medical devices to the monitor network.
•
If wireless network signal is poor, there may be a risk of CMS data loss.
•
RF interference may result in wireless network disconnection.
•
Maximum number of monitors connected to a single AP is 16. Too many
monitors connected to the same AP may result in network disconnection.
•
Disconnecting from the network may result in CMS data loss and function
failure. Check the patient in case of network disconnection and solve the
network problem as soon as possible.