Mindray VS 8A, Руководство оператора

Страница: 108 / 278

10 - 8
5. Place the probe in the ear canal.
6. Once positioned lightly in the ear canal, press and release the scan button.
7. Remove the probe from the ear as soon as the triple beep is heard. The
temperature and probe eject icon display on the LCD screen.
8. Press the eject button to eject the probe cover.
9. Replace the thermometer to the cradle.
NOTE
•
Always wait at least two minutes before taking another measurement in the
same ear.
•
Do not configure the thermometer during the start-up of the monitor.
Otherwise, the thermometer data may conflict with the data that displays on
the monitor.
10.4.5 Troubleshooting
10.4.6 Cleaning and Disinfecting the Tympanic Thermometer
Refer to the Genius 3 tethered tympanic thermometer operator’s manual for cleaning
and disinfection information.
10.5 Monitoring Temp with Exergen TemporalScanner™
Thermometer
The TemporalScanner™ thermometer measures the temperature of the skin over the
temporal artery. Operation is based on measuring the natural thermal infrared radiation
emitted from the surface of the skin over the temporal artery.
The TemporalScanner™ is a handheld infrared thermometer used by medical
professionals for the intermittent measurement of human body temperature of people
of all ages, by scanning the forehead skin over the temporal artery.
Message/Issue Cause Solution
Temp comm
abnormal The communication
between the monitor and
thermometer is abnormal. Eject and re-install the probe cover.
And then measure the temperature
again.
The measurement
site displayed on the
monitor conflicts
with that on the
thermometer. During the monitor start-
up, the thermometer has
the probe cover installed.
This causes the abnormal
start-up of the
thermometer. Keep the monitor power on and
wait till the thermometer
automatically switches off, and then
press the Scan button on the
thermometer.