Mindray VS 8A, Руководство оператора

Страница: 41 / 278

3 - 7
2. Set Screen Lock Duration .
◆
1 min , 30 sec , 20 sec or 10 sec : a countdown clock is displayed after the
touchscreen is locked. The touchscreen is enabled when the preset time is
reached.
◆
Permanent : the touchscreen can only be enabled manually.
If you need to manually enable the touchscreen:
1. Tap anywhere on the touchscreen.
2. Press and slide it to the position.
CAUTION
•
Check that the touchscreen is not damaged or broken. If there is any sign of
damage, stop using the monitor and contact the service personnel.
•
Wipe off the water on the touchscreen in case of rain or water spray.
3.7.2 Using the Knob (For VS 8 Series)
VS 8 series monitors, configured with touchscreen or not, provide a navigation knob and
four hardkeys. For detailed descriptions, refer to
2.7.2 Front View (VS 8 Series) .
3.7.3 Using the On-Screen Keyboard
The on-screen keyboard enables you to enter information:
■
Enter the information by selecting one character after another.
■
Select the Backspace key to delete single characters or select to delete
the entire entry.
■
Select the Caps Lock key to access uppercase letters.
■
Select the Enter key to confirm the entry and close the on-screen keyboard.
■
Select to show the password that has been input.
3.7.4 Using the Barcode Reader
The monitor supports both linear (1D) barcode reader and two-dimension (2D) barcode
reader. The barcode reader is connected to the monitor through the USB connector.
If you are using the Mindray custom 2D barcode reader (Model HS-1R or HS-1M), before
using the it for the first time, clear old data formats and configure the barcode reader.
Before configuring the Mindray custom barcode reader, clear old data formats. To do so,
follow this procedure:
1. Scan the engineering barcode to clear the previous data format.
2. Scan the 2D engineering barcode which contains your hospital’s data format.