Mindray VS 8A, Руководство оператора

Страница: 169 / 278

17 - 3
1. Select the Review quick key
→
select Scoring Review tab.
2. Set the filtering condition to PID , Name , or Visit No. . Then select the information
of the patient to be viewed.
3. Set Filter to MEWS , NEWS or NEWS2 .
4. Select a record to be viewed and select Detail to check more information.
17.2.5 Reviewing the Graphics Trends
The Graphic Trends review page displays trend data in a graphic form. To review the
Graphic Trends , follow this procedure:
1. Select the Review quick key
→
select Graphic Trends tab.
2. Select Zoom to set the period of data to be displayed on one screen.
3. Move the slider to the left or right to browse more trend data.
17.2.6 Reviewing Events
The monitor stores events in real time, including technical alarm events, physiological
alarm events, and operational events. When an event occurs, all the measurement
numerics and three event-related waveforms 16 seconds before and after the event is
stored.
NOTE
•
A total loss of power has no impact on the events stored.
•
Alarms are saved as events and will be maintained if the equipment is
powered down. The time of equipment power down is not recorded as an
event and cannot be reviewed.
•
Earlier events will be overwritten by later ones if the capacity is reached.
17.2.6.1 Viewing the Events Page
To enter the events review page, select Review quick key
→
select Events tab.
The Events page displays event list. Events are displayed in descending chronological
order. The most recent event is displayed at the top.The number of asterisk symbols
before an event indicate alarm priorities. Different color blocks are displayed on the left
of each event to indicate different event types.
■
Red: high priority alarm event
■
Yellow: medium priority alarm event
■
Cyan: low priority alarm event
■
White: operation-related event
You can view operation events not related to parameters, such as system time change.