Mindray BeneFusion SP3 Vet Скачать руководство пользователя

Страница: 51 / 84

9-3

NOTE



The lifespan of the battery depends on how frequently it is used and on

how long it has been used, battery capactiy decreases with increase in

charging and discharging times. If the maintenance and storage of the

battery is appropriate, the lifespan of the Lithium battery is no less than

300 times of full charging and discharging. If the use of battery is

improper, its lifespan shall be shortened or in failure status. We

recommend replacing the lithium battery every 3 years.



Please connect to the AC power source if [No Battery] alarm is triggered.

To prevent battery not used for a long time or in No Battery status, if

battery is not charging more than two months after battery is empty,

battery will be in failure status. Do not charge the failure battery, and

replace the failure battery.



If battery will not be used for a long time, we recommend keeping the

battery in a fully charged state and charging the battery every two

months for lifespan guarantee. Please replace the battery if the length of

its lifetime is obviously shortened during optimization.



The length of the battery’s lifetime depends on the device configuration
and operation, for example: Under the condition of the power supply by

the battery, frequent infusion at a high rate will also shorten the length of
the battery’s lifetime.

9.3 Battery Recycling

If there is any obvious damage to the battery or to the battery capacity exhausts, it

should be replaced and recycled appropriately. Please follow the applicable laws on

recycling.

WARNING



The battery must not be disassembled, burned or short-circuited.

Burning, exploding or leaking batteries can cause personal injury.

Содержание BeneFusion SP3 Vet




















































































Результаты поиска

Содержание BeneFusion SP3 Vet

Отзывы:

Похожие инструкции для BeneFusion SP3 Vet

Бренды по названию

Популярные бренды

Mindray BeneFusion SP3 Vet, Руководство оператора

Результаты поиска

Содержание BeneFusion SP3 Vet

Отзывы:

Похожие инструкции для BeneFusion SP3 Vet

Бренды по названию

Популярные бренды