Mindray BeneFusion SP3 Vet Скачать руководство пользователя

Страница: 47 / 84

8-2

8.2.1 Multi-level Alarm Rules

When several alarms occur simultaneously, the alarms proceed according to the

following rules:



When several alarms at different levels occur, the visible alarms and audible

alarms are consistent with the highest-level alarms.



When several alarms at different levels occur, only the highest-level alarm is

displayed, and after it is cancelled, the lower-level alarm will then be displayed.



When several alarms at the same level occur, the alarm information will be

demonstrated in an alternate manner.

The title bar of the syringe pump screen will display the corresponding alarm

information during the alarm blast, to see more details in

C Alarm Information.

NOTE



The [Communication interrupted] alarm of the pump and BeneFusion

CS5 Infusion Supervision System are delayed for 3 minutes, while other

alarms are delayed for less than 5 seconds.

8.3 Alarm Handling Rules

Under normal working conditions, when an alarm occurs, all the alarm types of the

syringe pump will alert according to their respective alarm levels. In addition, the

user can pause the alarm sound according to demands.



For high level (except No Battery) and medium level alarms, press

pause alarm sound for 2 minutes. When the alarm pause time expires, the

alarm tone will sound. Press

to cancel high level alarms (except No

Battery and System Error).



For low level alarms (Reminder, Time Near End, Syringe Near Empty and Low

Battery), press

to acknowledge the alarm condition, system will give out a

sound "du" every 5min, and a "

√" appears before the alarm message, indicating

that the alarm is acknowledged.



For low level alarms (No AC Power, Communication interrupted, Infusion

interrupted, Please reset time, Para. Unconfirmed), press

to cancel alarm.

NOTE



[No Battery] alarm sound is unable to be paused.

Содержание BeneFusion SP3 Vet




















































































Результаты поиска

Содержание BeneFusion SP3 Vet

Отзывы:

Похожие инструкции для BeneFusion SP3 Vet

Бренды по названию

Популярные бренды

Mindray BeneFusion SP3 Vet, Руководство оператора

Результаты поиска

Содержание BeneFusion SP3 Vet

Отзывы:

Похожие инструкции для BeneFusion SP3 Vet

Бренды по названию

Популярные бренды