MIMAKI CJV30 Series, Руководство по обслуживанию

Страница: 280 / 316

© 2009 MIMAKI ENGINEERING CO.,LTD. 7.3.1 P.2
1
2
3
4
5
6
7
8
7.3.1 PCB Damage Checksheet
C> Conditions before trouble occurred.
D> Please fill in replaced parts and replacement order.
E> Please write down below any advice or comment.
1. Please check and fill in the followings if items applied to the condition before trouble occurred.

Operate normally with no problems.
 Nozzle dropout/Ink deflection/Abnormal firing start to occur.
 Electric power failure or instant blackout occurred.

Sometimes Error and Warning message appeared.
Check error code and message listed as below.
Also fill in the timing and frequency of error occurrence. Ex. [occurred sometimes while printing]
Error code/Message
Occurred [Timing/Frequency]

ERROR 07
 HEAD
 VOLTAGE

ERROR 50
 MEDIA DETECT
 MEDIA SET POSITION
 ERROR 200 HEAD MEMORY
 ERROR 202 DEVICE CONSTRUCTION
 ERROR 205 47V HEAD VOLTAGE

ERROR 207
 OVERFLOW
 UNDERFLOW
 SLEW RATE
 ERROR 40 MOTOR ALARM X
 ERROR 41 MOTOR ALARM Y
 ERROR 42 X OVER CURRENT
 ERROR 43 Y OVER CURRENT

Other (describe problem specifically)
2. Please write conditions or phenomenon in mind before trouble occurred.

Replacement Parts Order Solved Unsolved Condition changed [describe conditions below]
 Head [ ]  
 Head FFC ASSY [ ]  
 HDC FFC ASSY [ ]  

PCB [ ]  
 Main PCB
PCB No. Before replacement [ ] After replacement [ ]
 Slider PCB [ ]  
 Power supply PCB
[ ]
 
 Fuse of Main PCB [ ]  

Others Parts
[ ]
[ ]  
[ ] [ ]  
[ ] [ ]  
[ ] [ ]  
R.1.0
Maintenance Manual > Troubleshooting > Detailed Methods of Coping with the Malfunctions > PCB Damage Checksheet
Model CJV30/TPC Issued 2008.12.06 Revised F/W ver. 1.00 Remark
1.0
Rev.