MIMAKI CJV30 Series, Руководство по обслуживанию

Страница: 145 / 316

© 2009 MIMAKI ENGINEERING CO.,LTD. 5.1.14 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Test Items > Test Function > SENSOR TEST
Model CJV30/TPC Issued 2008.08.04 Revised F/W ver. 1.00 Remark
1.0
Rev.
5.1.14 SENSOR TEST
 Purpose
To check if the each sensor of the instruments printer functions normally.
 Function
Various sensors are tested. Before starting the test, the servomotor and stepping motor are turned off. After finishing
the test, initial movement of original position detection is executed.
 List of sensor test
No. Item Description LCD display
1 SET LEVER State display of clamp lever sensor ON/OFF
2 R.PAPER State display of rear paper sensor ON/OFF
3 Y-ORIGIN State display of Y origin sensor ON/OFF
4 WIPER State display of wiper sensor ON/OFF
5 HEAD HEIGHT State display of head height sensor ON/OFF
6 PR SENSOR Detects the position of the pinch roller. ON/OFF
7 CUT HEAD JOINT Checks the connection between the cut head carriage and connection unit. ON/OFF
8 Main PCB ID Judges the main PCB ID dedicated to CJV. 800 or more
9 Head Voltage Measures the head voltage. If it is less than 800, there is a possibility of the
malfunction of the head, leading to lowered voltage or fuse blowout. 800 or more
The condition of all the sensors is displayed on the screen by depressing [FUNCTION] during the time
when the sensor test is selected.
(It is possible to display this screen by changing over any other screens.)
R.PAPER
(Paper Sensor)
SET LEVER
(Clamp Sensor)
Y-ORIGIN
(Y-origin Sensor)
HEAD HEIGHT
(Head Height Sensor)
WIPER
(Wiper Origin Sensor)
PR SENSOR
CUT HEAD JOINT
(Joint Sensor)
L=o P=o Y=x W=x C=o
H=o PR=x CJ=x
Displayed in order of sensor test menu. ON=o. OFF=x
L: SET LEVER P: R.PAPER Y: Y-ORIGIN W: WIPER
H: HEAD HEIGHT PR: PR SENSOR CJ: CUT HEAD JOINT