MIMAKI CJV30 Series, Руководство по обслуживанию

Страница: 279 / 316

© 2009 MIMAKI ENGINEERING CO.,LTD. 7.3.1 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Troubleshooting > Detailed Methods of Coping with the Malfunctions > PCB Damage Checksheet
Model CJV30/TPC Issued 2008.12.06 Revised F/W ver. 1.00 Remark
1.0
Rev.
7.3.1 PCB Damage Checksheet
Please fill out this checksheet to search failure sources of head and PCB damage.
We would appreciate your taking time to complete this checksheet
 Please confirm the machine which has had countermeasure or not.
 Some countermeasure are not completed. ........................................Work on uncomplied countermeasure.
 Complied countermeasure. .................................................................Fill out following A) through E) and attach to the Damage Report.
A> Fill out the machine information,
B> Conditions when trouble occurred.
1. Confirmation for countermeasure of the selected models.

JV33-130/160, TS3-1600
 Firmware Version 4.00 or later.
 Main PCB revision label : [  E104853-*1 Pb/F] or [  E105997-A Pb/F] (* = A to G)
 Completed countermeasure for HDC FFC disconnection of movable parts.

JV33-130BS/160BS
 Firmware Version 3.00 or later.
 Main PCB revision label : [  E105454-*1 Pb/F] or [  E105998-A Pb/F] (* = A to G)

JV33-260, TS3-2600
 Firmware Version 4.00 or later.

JV33-260BS
 Firmware Version 3.00 or later.

CJV30-60/100/130/160, CJV30-60BS/100BS/130BS/160BS, TPC-1000
 Firmware Version 2.00 or later.
Damage Date) Installation Date) Serial Number Ink Type Ink Set
 SS21  ES3  BS
 Other : [ ]
 4 color  6 +W color
 6 color  Other : [ ]
1. Check the conditions below.

Unable to turn ON the machine.
 LCD light do not turn on.
 LCD light is on but nothing displayed.

Abnormal ink firing.

Ink firing with particular nozzle line as once.
 No ink firing with particular nozzle line.

Error displayed on LCD pannel.
Check the Error Code/Message displayed on LCD as below.
Also fill in the timing and frequency of error occurrence. Ex. [Everytime occur at test drawing]
Error code/Message
Occurred [Timing/Frequency]

ERROR 07
 HEAD
 VOLTAGE

ERROR 50
 MEDIA DETECT
 MEDIA SET POSITION
 ERROR 200 HEAD MEMORY
 ERROR 202 DEVICE CONSTRUCTION
 ERROR 205 47V HEAD VOLTAGE
 ERROR 207
  OVERFLOW
  UNDERFLOW
  SLEW RATE
 Other (describe problem specifically)
2. How and in which condition the trouble occurred?
