Page 27 or 34
Break apart the end of the Y drag chain a few links away from
where the wires exit to the control box. This will allow you to
more easily manipulate the cable chain to mount to the box.
The control box has a slotted bracket already mounted to its
underside. Mount the end of the cable chain to this using (2)
M3x8 machine screws and (2) M3 nylock nuts. The head of
the screw should closest to the wires and the nut on the other
side.
Note that the control box has been placed on its side to install
these screws. After installing, set the control box back on its
rubber feet and snap the drag chain back together.
