Page 6 or 34
Gantry End Plate Assembly
Parts
Motor Side Gantry Plate
Idler Side Gantry Plate
X/Z Motor Spacer Plate
Short Wire Motor
Hardware
Pillow Block Bearing
Coupler
(2) Anti-backlash Nut
(2) M5 Grub Screw (in Anti-backlash nut bag)
(2) M5 Jam Nut (in Anti-backlash nut bag)
(4) M3x16 Machine Screw
(2) M5x10 Machine Screw
(4) M5x16 Machine Screw
V-Wheel Kit
Tools
8mm or 5/16 Wrench or Socket
Phillips Screwdriver
3mm Hex Key
2.5mm Hex Key
Place a v-wheel on a flat, hard surface. Place a
bearing on top of the v-wheel. Using something
else flat and hard, press the bearing into the v-
wheel using your body weight. A section of wood is pictured. Turn the v-wheel over. Place a M5
washer on the bearing in the wheel.
It is especially important to remember the M5 Washer. It is
extremely hard to correct this if you forget.
Press a second bearing into the wheel. Repeat this process
for the other wheels.
