Page 11 or 34
Place a M5x30 machine screw through the hole in the
front of the X Plate Extrusion. Place an eccentric
spacer on the screw. The thin part of the spacer
should face the top if near the top, the bottom if near
the bottom.
Then place a V-wheel on the screw and secure with a
M5 nylock nut. Repeat the process with three other
v-wheels. Leave Snug. See the picture to the right of
the screw being inserted through the hole in the front
of the X plate with the other components slid onto it.
Of the 8 V wheels on the X plate, 4 use eccentric
spacers and 4 use standard spacers. The top and
bottom holes use eccentric spacers. The four in the
middle use standard spacers.
Attach the UHMW Screw Seat to the Z Bottom Plate
using (2) M5x12 button cap screws and (2) M5 nylock
nuts.
