Page 1-9
Chapter 1: Machine Overview
|
Section 1.6: Controls: Purposes and Functions
Figure 1.14:
Power Switch
Power Switch
The purpose of the Power Switch is to turn the machine on and
off.
When using hot air, if the Power Switch is turned to the on
position, the internal air compressor will run if the drive system is
ready for operation.
When using hot wedge if the Power Switch is turned to the on
position, the drive system is ready for operation.
When using hot air and the Power Switch is turned to the off
position, the machine will continue to run for approximately 3
minutes through a cool down cycle and then automatically shut off.
When using hot wedge and the Power Switch is turned to the off
position, the machine will immediately shut off
Figure 1.15:
Hot Air Switch
Hot Air Switch
The purpose of the Hot Air Switch is to control the power supply
to the hot air temperature controller, which generates heat from the
heat elements.
When the Hot Air Switch is turned to the on position, the
temperature controller will be activated and begin raising the
temperature to the preset temperature. It will take approximately
3-5 minutes for the temperature to reach the set point.
When the Hot Air Switch is turned off, the hot air temperature
controller will shut down and power will be removed from the heat
elements.
Figure 1.16:
Wedge Switch
The purpose of the wedge switch is to control the power supply to
the wedge temperature controller, which generates heat to the
wedge.
When the wedge switch is turned to the on position, the wedge
temperature controller will be activated and begin raising the
temperature to the preset temperature. It will take approximately
3-5 minutes for the wedge to reach the set point.
When the wedge switch is turned off the wedge temperature
controller will shut down and power will be removed from the
wedge.
Wedge Switch
Содержание T-100
Страница 1: ......
