Miller Weldmaster T-100, Руководство пользователя

Страница: 11 / 56

Page 1-10
Chapter 1: Machine Overview |
Section 1.6: Controls: Purposes and Functions
Figure 1.17:
Heat Swing
Switch
Heat Swing
The purpose of the Heat Swing Switch is to control the swing
action of the heat swing assembly.
When the Heat Swing Switch is turned to the on position, the heat
source will automatically swing into position for welding operation
when the Drive Foot Switch is depressed.
When the Heat Swing Switch is turned to the off position, the
heat source will remain in the static position when the Drive Foot
Switch is depressed.
Figure 1.18:
Drive Switch
Drive Switch
The purpose of the Drive Forward/Reverse Switch is to control
the rotational direction of the weld rollers and puller rollers.
When the Drive Switch is turned to the forward position, the weld
rollers and puller rollers will rotate in the welding direction, when
the Drive Foot Switch is depressed.
When the Drive Switch is turned to the reverse position, the weld
rollers and puller rollers will rotate in the opposite or reverse
direction when the Drive Foot Switch is depressed. The hot air nozzle
will not swing into position in the reverse setting. The hot wedge
however, will for maintenance purposes.
Figure 1.19:
Override Switch
Override Switch
The purpose of the Override Switch is to engage the complete
welding process without using the Drive Foot Switch.
When the Override Switch is turned to the run position, the heat
source will swing into place and the weld rollers and puller rollers
will turn for welding operation, as if the Drive Foot Switch were
depressed.
When the Override Switch is turned to the stop position, the heat
source will swing out and the weld rollers and puller rollers will cease
to rotate, stopping the welding operation as if the Drive Foot Switch
were released.