.
A complete Parts List is available at www.MillerWelds.com
OM-254915 Page 42
6-8. Purge Mode
Ref. 242 929-C
1
PURG GAS
−
Purge Mode
The Millermatic 350P Aluminum is
equipped with a Jog/Purge switch
located in the wire compartment.
Pressing the Purge button allows
shielding gas to flow. This feature
allows the user to purge gas lines
and to preset gas pressure at the
regulator before welding. Purge
mode is indicated by “PURG” in the
left display and “GAS” in the right
display.
1
PURG
GAS
1
6-9. Weld Display Status
Before welding the Left and Right Displays will show Arc Length or Volts, and Wire feed speed depending on weld process. The indicator lights beneath
each display will indicate what is being displayed. While welding the displays will show welding volts and current, the indicator lights under each display
will change to volts and amps respectively. In addition, for approximately 5 seconds after the trigger is released the actual voltage and current will be
held on the display. If a user turns either knob or WFS adjustment on the gun within the 5 second hold window the displays will revert back to Arc Length
or Volts, and Wire feed speed depending on weld process.
