.
A complete Parts List is available at www.MillerWelds.com
OM-254915 Page 11
SECTION 4
−
SPECIFICATIONS
4-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Software Licensing Agreement
The End User License Agreement and any third-party notices and terms and conditions pertaining to third-party software can be found at
https://www.millerwelds.com/eula
and are incorporated by reference herein.
4-3. Information About Default Weld Parameters And Settings
NOTICE
−
Each welding application is unique. Although certain Miller Electric products are designed to determine and default to certain typical welding
parameters and settings based upon specific and relatively limited application variables input by the end user, such default settings are for reference
purposes only; and final weld results can be affected by other variables and application-specific circumstances. The appropriateness of all parameters
and settings should be evaluated and modified by the end user as necessary based upon application-specific requirements. The end user is solely
responsible for selection and coordination of appropriate equipment, adoption or adjustment of default weld parameters and settings, and ultimate
quality and durability of all resultant welds. Miller Electric expressly disclaims any and all implied warranties including any implied warranty of fitness
for a particular purpose.
4-4. Specifications
Rated Output
Max. Open
Circuit
Voltage
60 Hz
Amps Input at Rated Output
200 V
230 V
460 V
KVA
KW
300 A at
32 VDC,
60% Duty
Cycle
350 A at
32 VDC,
40% Duty
Cycle
90
Single-Phase
69
(1.7*)
61
(1.5*)
30
(0.75*)
13.1
11.2
Three-Phase
34
(1.7*)
30
(1.5*)
15
(0.75*)
11.6
11.5
* While idling
Wire Type and Diameter
Wire Feed Speed
Dimensions
Net Weight
Aluminum
50
−
800 IPM
(1.3
−
20.3 m/min)
(depending on welding gun)
H: 34 in. (864 mm)
W: 19 in. (483 mm)
D: 41 in. (1041 mm)
181 lb
(82 kg)
.035
−
.047 in.
(0.9
−
1.2 mm)
Operating Temperature Range:
−
20C to +40C
Storage Temperature Range: -30C to + 50C
