Mighty Mule 200 E-Z GATE OPENER UL325 SERIES Скачать руководство пользователя | Manualshive

Страница: 1 / 39

background image

©

2008 GTO, Inc.

R200INST

rev- 08/06/08

Installation Manual for the

This product meets and exceeds the requirements of UL 325, the standard which regulates gate opener safety,

as established and made effective March 1, 2000, by Underwriters Laboratories Inc.

WARNING!

This equipment is similar to other gate or door equipment and meets or exceeds
Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has
hazards associated with its use and therefore by installing this product the installer
and user accept full responsibility for following and noting the installation and
safety instructions. Failure to follow installation and safety instructions can result
in hazards developing due to improper assembly. You agree to properly install this
product and that if you fail to do so GTO, Inc. shall in no event be liable for direct,
indirect, incidental, special or consequential damages or loss of profits whether
based in contract tort or any other legal theory during the course of the warranty
or at any time thereafter. The installer and/or user agree to assume responsibility
for all liability and use of this product releasing GTO, Inc. from any and all liability.
If you are not in agreement with this disclaimer or do not feel capable of properly
following all installation and safety instructions you may return this product for full
replacement value.

READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before attempting to
install and use this automatic gate opener. This gate opener produces a high level
of force. Stay clear of the unit while it is operating and exercise caution at all times.

All automatic gate openers are intended for use on vehicular gates only.

GTO Sales: (800) 543-GATE (4283) or (850) 575-0176 • Fax (850) 575-8912 or

GTO Technical Service (800) 543-1236 or (850) 575-4144

For 24 hour/day, 7 day/week Technical Service visit http://support.gtoinc.com/support/troubleshooter.aspx

UL325 SERIES

200

®

E-Z GATE OPENER

For more information on Mighty Mule’s full line of Automatic Gate Openers and Access Controls visit our website at www.mightymule.com

1
2
3
...
»

Содержание 200 E-Z GATE OPENER UL325 SERIES








































Отзывы:

Нет отзывов

Похожие инструкции для 200 E-Z GATE OPENER UL325 SERIES

Бренд: CAME Страницы: 108

Бренд: FAAC Страницы: 31

Бренд: Topens Страницы: 4

Бренд: Telcoma Страницы: 16

Intellicode 1022

Бренд: Genie Страницы: 2

Бренд: TdA Страницы: 9

Бренд: Hamilton Beach Страницы: 8

Бренд: Roma Страницы: 40

Бренд: Dea Страницы: 216

Estate Swing Heavy Duty Series

Бренд: FAAC Страницы: 33

MEC 800 Special

Бренд: fadini Страницы: 12

MAX SUPER ARM 1300

Бренд: Maximum Controls Страницы: 15

Proctor Silex 75288

Бренд: Hamilton Beach Страницы: 12

Бренд: FAAC Страницы: 14

Бренд: Oster Страницы: 6

Бренд: Merlin Страницы: 24

SilentDrive Elite

Бренд: Merlin Страницы: 20

Бренд: Merlin Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды