14
M i g h t y M u l e 2 0 0
Determining the Mounting Position
of the Post Bracket Assembly and the Gate Bracket
Step 3
With the gate in the open position (up to 110º from its closed position), and the opener fully retracted,
adjust the post bracket assembly and gate bracket until the opener is level. While holding the opener level,
use C-clamps to
temporarily
keep the post bracket assembly and gate bracket in their respective positions
on the fence post and gate.
Step 1
Insert the
3
/
8
" x 1
1
/
2
"
bolt through the center
hole of the post brackets
and post pivot bracket
as shown. Fasten a
3
/
8
"
washer and
3
/
8
" lock nut
on the end of the bolt.
DO NOT overtighten the
lock nut because the
post pivot bracket will
have to be adjusted later.
Step 2
Attach post bracket assembly to the rear mount of the opener with a clevis pin and a 3/8" washer. Secure
the clevis pin with a hairpin clip. Attach gate bracket to the front mount of the opener with a clevis pin and a
3/8" bushing. Secure the clevis pin with a hairpin clip
3/8" x 1-1/2" Bolt
3/8" Lock Nut
Post Pivot Bracket
Post Bracket
Post Bracket Assembly
3/8" Washer
REMINDER:
The following steps are
intended for pull-to-open
gate installations only.
Clevis Pin
Hairpin Clip
Post Bracket Assembly
3/8” Washer
Rear Mount
Opener
Clevis
Pin
Hairpin Clip
Gate Bracket
Front Mount
Bushing
Fence Post
Gate In Open Position
LEVEL horizontal cross member
Post Bracket Assembly
Gate Bracket
Level Opener
