![Mighty Mule 200 E-Z GATE OPENER UL325 SERIES Скачать руководство пользователя страница 37](http://html1.mh-extra.com/html/mighty-mule/200-e-z-gate-opener-ul325-series/200-e-z-gate-opener-ul325-series_installation-manual_1793594037.webp)
M i g h t y M u l e 2 0 0
33
Column Installation Information
IF THIS OPENER WILL BE USED WITH GATES THAT ARE MOUNTED ON
MASONRY, BRICK, OR ROCK (etc.) COLUMNS:
READ THE FOLLOWING CAREFULLY BEFORE PROCEEDING
A. The simplest solution is to install the opener in a push-to-open configuration (requires Push-To-Open
Bracket, see Accessory Catalog). The minimum clearance is easier to achieve and clearance is no
longer a problem, since the opener will be pushing the gate away from the column instead of pulling it
toward the column. It is recommended that you place a steel plate between the opener mounting
brackets and masonry surface for additional strength.
B. If a push-to-open installation is impossible due to traffic hazards, terrain, etc., another option is to re-
hang the gate. You may hang it on a post, either in the center of the column or at the back corner, or
move the gate to the back corner of the columns.
C. The most difficult solution is to cut a notch in the column to accommodate the opener and power cable.
This job is NOT for the inexperienced!
Column
Pivot Bracket
Gate
A
B
Column Mount Example
(A + B can not exceed 13 inches)
Example: If A is 2" then B can not exceed 11"
Hinge